OPM 2.0 Virtual Appliance Quick Install Notes: Part 2 of 2 (Web UI)

Continuing from part 1...

1) Log into OnCommand Performance Manager in a web browser by using https://IP_of_OPM or https://FQDN_of_OPM:

Image 1: Logging into OPM

2) Set Up Email

Image 2: OPM - Set Up Email

3) Set Up AutoSupport

Q: Do you want to enable AutoSupport capabilities? {Yes/No}

Note: For this walkthrough ‘no’ has been selected.

4) Change Admin Credentials (Optional)

5) Add Clusters

Note: Add at least one cluster to being collecting data

Image 3: Final Step in OPM GUI initial setup

6) The end!

Note: It can take up to 15 minutes to discover clusters.

Image 4: NetApp OnCommand Performance Manager