Openfiler v2.3 Fixes for vSphere

The once trusty Openfiler storage modules had been playing up recently since the VMware infrastructure was upgraded from VI3 to vSphere; here are some fixes which seem to have done the trick in fixing the problems with LUNs locking up under high I/O.

1: Properties of the iSCSI Target (Volumes -> Target Configuration)

Make these changes to the default settings:


2: Unmap LUN and re-map (Volumes -> LUN Mapping) as write-back and fileio

3: Connect via SSH with root login and run this command
conary updateall

Note: the Openfiler box needs internet access and if need to go through a proxy then edit the file conaryrc in /etc, and put this line at the top with the relevant details:

proxy http://user@domain.priv:password@webproxy:port


Using Openfiler with Microsoft iSCSI Initiator:
If you are experiencing slow performance from a Windows Server connected to Openfiler using the Microsoft iSCSI initiator, the changes to the default iSCSI target settings outlined above will help. 
For example:
We were using Openfiler as a temporary iSCSI storage device for the staging area  for a large Exchange public folder restore. With the default settings - the performance writing to the Openfiler storage was very poor at 200 MB/min. With the modified settings -
ImmediateData = yes
MaxRecvDataSegmentLength = 262144
MaxXmitDataSegmentLength = 262144
R/W Mode = write-back
Transfer Mode = fileio
- we were  getting a transfer rate of 2 GB/min across the 1 Gbps network.

Comments

  1. nice notes,
    would you please give some "from-scratch-configuration" explanation of this openfiler stuf?
    (config after installation)in order to work with vmware server.
    thx.

    ReplyDelete
    Replies
    1. Hi Antz, thank you for the comment. We were having problems with VMware datastores on Openfiler locking up under high I/O, and to resolve had to run a command via the VMware ESX CLI (sorry, cannot remember what the command was.) The fixes were a selection from the many Openfiler forum posts from the time, and after application we had no problems. Cheers! PS Now no longer using Openfiler, and using Nexentastor for "free/re-purposed" storage instead.

      Delete


    2. Đoan Mộc Xuyên nổi giận, trong tay một mảnh hắc mang xuất hiện, lập tức hắc mang hóa thành một lợi trảo rất lớn chộp tới Nhạc Thành.

      - Các ngươi lui ra phía sau.

      Nhạc Thành nhìn đám người Đông Phương Lạc Nhan, Yến Hiểu Kỳ nói, để cho các nàng không bị ảnh hướng.

      Đồng thời, khuôn mặt Nhạc Thành cũng lộ ra một tia lãnh ý, mặc dù không thể giết được Đoan Mộc Xuyên ngay, nhưng muốn chống lại thì không có vấn đề gì, chỉ cần năm bộ Kim Tiên Khôi lỗi phá huỷ mấy bộ Nhân Hình khôi lỗi này, sau đó tập chung đối phó với Đodongtam
      mu moi ra hom nay
      tim phong tro
      http://nhatroso.com/
      nhạc sàn
      tổng đài tư vấn luật
      văn phòng luật hà nội
      tổng đài tư vấn luật
      thành lập công ty trọn gói
      http://we-cooking.com/
      chém gió
      trung tâm tiếng anhan Mộc Xuyên.

      Về phần Đoan Mộc Nguyên, Nhạc Thành biết rõ Thanh Đồng cũng đủ đối phó rồi.

      - Kim Long chi thể.

      - Kiếm Âm Dương.

      Trong tay thủ ấn đánh ra, bên trong mi tâm Nhạc Thành bạch mang lóe lên, kiếm Âm Dương nhanh chóng xuất hiện ở trước thân.

      - Đi.

      Delete
  2. i've just setup openfiler 2.9, and now this mini-SAN operate for providing Datastorage for my Esxi (via SCSI). I still explore this stuff instead. :D

    Btw,thanks for "Nexentastor" info, i will checked it too.

    ReplyDelete

Post a Comment