Clustered ONTAP Administration Notes CLI Crib Sheet: Part ii/v

This 5 part posting is a very rough and ready CLI crib sheet for Clustered ONTAP.


The version of CDOT here is 8.1.1 / 8.1.2.

6: PHYSICAL NETWORKING

> network port modify ?
Note: two cluster ports are required per node

> network port show
> network fcp adapter show

7: VIRTUAL NETWORKING

> network interface show
> network routing-groups show
> network routing-groups route show
> network interface show output
> net int failover-groups create -failover-group customfailover1 -node clusa-02 -port e0d
> net int modify -vserver_name vs2 -lif data1 -use-failover-group enabled -failover-group customfailover1
> net int show -vserver vs2 -lif vs2_lif1
> net int failover-groups show
> network interface create

EXAMPLE 7.1: CREATE A NAS DATA LIF

> net int create -vserver vs1 -lif data1 -role data -home-node clusa-01 -home-port a0a -address X.X.X.X -netmask X.X.X.X
> net int show
> net int show -vserver vs1 -lif data1

EXAMPLE 7.2: MIGRATE A DATA LIF

> net int migrate -vserver vs1 -lif data1 -dest-node clusa-02 -dest-port e0c
> net int show
> net int show -vserver vs1 -lif data1
> net int revert -vserver vs1 -lif data1

EXAMPLE 7.3: RE-HOME A DATA LIF

> net int modify -vserver vs1 -lif data1 -home-node clusa-02 -home-port e0d
> net int show
> net int revert -vserver vs1 -lif data1
> net int show

EXAMPLE 7.4: FAIL OVER A DATA LIF

> net int show -vserver vs1 -lif data1 -instance
> net int failover show
> system node reboot -node clusa-02
> net into show
> net int revert -vserver vs1 -lif data*

EXAMPLE 7.5: DELETE THE VLANS AND THE INTERFACE GROUP

> network interface show
> network port show
> net port vlan show
> net port vlan delete -node clusa-01 -vlan-name a0a-11
> net port vlan delete -node clusa-01 -vlan-name a0a-22
> net port vlan delete -node clusa-01 -vlan-name a0a-33
> set advanced
*> net port modify -node clusa-01 -port a0a -up-admin false
*> set admin
> net port ifgrp delete -node clusa-01 -ifgrp a0a

Comments